Our radiant storage heating system combines three systems

Direct radiating heat, convection and heat dissipation without electrical power

At the core of our ComfortRapid radiant storage heating system is internal refractory brick, specially developed for this application. Inside this is the heating conductor. Unlike conventional electric heating systems, it is the brick that is heated rather than the steel casing. The heat is diffused into the room directly via the plates positioned above it. At the same time, the hot storage brick draws in cold air from below, heats it up and returns it to the room from the top of the radiator: heat by convection. When the room temperature reaches the desired value, which you have set on the thermostat, then the radiator switches off and the refractory brick continues to emit heat without consuming electricity.

Greater heating power thanks to separate heating zones

Normally, excess heat is generated in the upper part of a heating appliance. This results unequal transfer of heat into the room. In order to ensure uniform heat distribution, the ComfortRapid radiant storage radiator features separate upper and lower heating zones, each with a different rated output.

  • 2 cm thick refractory brick core
  • Sophisticated combination of convection and radiation
  • No air turbulence created by fans
  • Completely odour-free and silent
  • Available in multiple sizes
  • For wall installation or mounting without requiring a professional installer
  • 245 Watts in the upper zone
  • Each element is equipped with a temperature switch
  • 395 Watts in the lower zone